Gate, Globe and Needle Valves
Bronze – AS1628 – Gate Valve
- StandardsMark AS1628-1999 – Licence No. 1051
- Meets requirements MP52 – Tested Gates
- Bronze body
- Materials are dezincification resistant as required by AS1628
- Handwheel standard is cast iron – option is T-Bar cast iron
- Unique “wrap-around” bonnet
- Sizes 8mm to 100mm
Technical Brochures
HP Valves
Gate, globe, check, screw-down non-return, needle and blow-off valves
- Designed to ANSI B16.34 and DIN 3840 – Shell Hague Approved
- Forged carbon, Alloy steels and stainless steel
- Screwed, socket weld, butt weld or flanged
- Sizes 10 to 50mm forged
- Rating ANSI Class 150# to 4500#
- Manually, Pneumatically and Electrically operated
- For systems in the petrochemical, refining, offshore, paper mills, thermal power plants
Technical Brochures
Parallel Slide Gate Valves
Key Valve Technologies (KVT)
- High pressure and high temperature service zero leakage
- Designed to ASME B16.34 Standard and Special Class
- Pressure seal and bolted bonnet designs
- Forged carbon and alloy steels, and stainless steel
- Sizes 15mm to 600mm
- Rating ANSI Class 600# to 4500#
- Manually, Pneumatically and Electrically operated
- Vee-port trim design available for throttling service
Technical Brochures
Gate & Globe Valves
Stainless steel, bronze, cast steel, cast iron
• Rising and non-rising spindles
• Ends screwed and flanged BSTE/ANSI
• Sizes 15mm to 300mm
KSB Gate Valves
Applications:
- Power stations, Refineries, general industry, process engineering
- For water, steam, gas, oil & other media
Design:
- As per ASME B 16.34; API 600 or DIN Standards
- Available in Forged & Cast Construction
- Outside Screw & Yoke, Bolted Bonnet (Low Pressure Valves)
- Pressure Seal Bonnet Design (High Pressure Valves)
- Available with Stellite hard-faced Seats & Disc surface
- Graphite gaskets & packings with Braided wiping rings and other optional packing available
- Available with Electric Actuator
- Double disc wedge design
KSB Globe Valves
Applications:
- Power stations, Refineries, general industry, process engineering
- For water, steam, gas, oil & other media
Design:
- As per ASME B 16.34; BS 1873 or DIN Standards
- Available in Forged & Cast Construction; Bellow Flange design
- Bolted Bonnet Design (Low Pressure Valves)
- Pressure Seal Bonnet Design (High Pressure Valves)
- Available with Stellite hard-faced Seats & Disc surface
- Graphite gaskets & packings with Braided wiping rings and other optional packing available
- Available with Electric Actuator
Technical Brochures
- KSB Sicca Forged Valves
- ECOLINE-GL150-600 05-2 Inch Globe Valve
- KSB ECOLINE-GT150-600 05-2 Inch Gate Valve
- ECOLINE-GL 150-600 2-12 Inch Globe Valve
- KSB ECOLINE-GT 150-600 2-36Inch Gate valve
- Nori 500 High Pressure Globe Valve
- KSB Sicca HP Cast Gate Valve
- Sicca Pr Seal Globe
- KSB ZTS Gate Valve – High Pressure
Instrument Needle Valves
Needle valves for pressure transmitter/gauge/switch and general isolation.
- B8 Block and bleed, P6 multiport, A9 angle, G5 High flow and R7 viscous/plugging service
- 316SS Standard with HS Stem – Self-Centring, non-rotating tip, PTFE packing – NACE MR-01-75
- High Temperature stems and Graphoil packing
- RP stem for soft seat and SO for soft tip available
- Carbon steel, Brass or Monel available
Instrument Manifolds
Contact us for more information on our range of Instrument Manifolds.
Bar Stock Needle Valves
AUSTRAL Series KS6000
- Carbon steel body Fig 6000CS
- Stainless steel body Fig 6000SS
- Pressure rating soft seat – 41,000 kPa (6000 psi)
- End connections: Female x Female Or Female x male
- Thread types – BSPT, BSP NPT
- Adjustable gland
- Graphite packing
- Sizes: 8mm to 25mm