Actuator Fitting Service

Austral-Powerflo provides fast, professional actuator and accessory mounting service for Pneumatic and Electric actuators

  • We stock Double Acting/Spring Return Pneumatic Actuators and accessories
  • Fitting of solenoids, position indicators, switches
  • Supply of valve/actuators or mounting service only

All valve/actuator assemblies are function tested before despatch

Pneumatic & Electric Actuators

  • Pneumatic Quarter Turn, Spring Return/DA (fail close/fail open)
  • Rack & pinion and scotch yoke
  • Solar position indicator with inductive proximity switches (on request)
  • Manual override option
  • ISO 5211 and NAMUR interface
  • Hydraulic (water or oil) and gas over oil
  • Electric Quarter Turn and Multi-turn for linear operation
  • On/Off or modulating control
  • Multi voltage: standard, intrinsically safe and explosion-proof

Technical Brochure

Solenoid Valves

  • 2-way, 3-way and 4-way
  • Stocks readily available throughout Australia
  • Solenoid Valves – 2-way for fuel gas service approved to AG214 Automatic Shut-Off Valves Class 1 & 3

Steel Ball Valves – One-Piece Entry – Fire Safe (Certified)

AUSTRAL Series 1150

  • Carbon steel A216 Gr WCB
  • Stainless steel A351 Gr CF8M
  • REDUCED Bore, Floating Ball
  • Fire Tested to API 607 – 4th edition
  • NACE MR-01-75
  • API 598, API 698, ANSI B16.10
  • Lever or Gear operated
  • Sizes 20mm to 300mm

Technical Brochures

Two-Piece Body – Fire Safe (Certified)

AUSTRAL Series 2150 – 2300

  • Carbon steel A216 Gr WCB
  • Stainless steel A351 Gr CF8M
  • FULL Bore, Floating Ball
  • Fire Tested to API 607 – 4th edition
  • NACE MR-01-75
  • API 598, API 698, ANSI B16.10
  • Lever or Gear operated
  • Sizes 15mm to 350mm
  • Optional 600mm Extension Stem

Rhino Series 152 & 302

  • 2 Piece
  • Full Port
  • Flanged ANSI Class 150 – 13mm to 200mm
  • Flanged ANSI Class 300 – 50mm to 150mm
  • ISO Mounting Pad (Series 152)
  • Fire–Safe – Standard API 607 (4th Edition) and API 6D

Technical Brochures

Trunnion Mounted Ball Valves – Fire Safe (Certified)

Rhino

  • Forged, Welded Body
  • 50mm to 1200mm
  • ANSI 150, 300, 600, 900 and 2500
  • Temperature Rating –46°C to 200°C
  • Conform to API 6d
  • Fire–Tested to BS6755 and API6FA
  • API 2000 to API 15000
  • Temperature Range: –196°C to 700°C

Technical Brochures

Three-Piece Fire Safe (Certified)

Rhino Series 44 & F44

  • Sizes 6mm to 50mm
  • Full or Reduced bore
  • Strong Construction in Brass, Carbon & Stainless Steel
  • Class 400, 600 – Option H600
  • Ends – NPT, BSP, BSPT, SW & BW
  • Series F44 Fire-Safe API 607 – 4th Edition

Technical Brochures

Three-Piece Bolted / In-Line

AUSTRAL Series JV-9301N-HT

  • Stainless steel A351 CF8M
  • Pressure – 6895 kPa (PN63)
  • Full Port
  • End connections – NPT, BSP, BSPT & SW
  • Adjustable packing with blow out proof stem
  • C/w lever locking device
  • Sizes 8mm to 100mm

Technical Brochures

Two Piece Body – AGA 201 Approval 2100 kPa

AUSTRAL G2R

  • Stainless steel A351 Gr. CF8M
  • Regular bore
  • 13,800 kPa WOG
  • AGA approval No. 4311 (AGA Safety shut off 201)
  • Padlocking Handle: Lock open / lock close.
  • Sizes 8mm to 50mm

Technical Brochures

Butterfly Valves

AUSTRAL VF730 (Wafer) & VF733 (Lugged)

  • Cast iron and cast steel body
  • EPDM, Nitrile, Viton, or Nylon 11 coated disc
  • Disc 316SS
  • 16 Bar WOG (230 psi)
  • AGA 201 – Approval No. 6726
  • Mounting stem to ISO 5211
  • Shaft Square drive – suitable for direct couple to actuator
  • AS 2129 Table E or ANSI 150# available
  • Sizes 40mm to 600mm

Technical Brochures

Butterfly Valve – Stainless Steel Body

AUSTRAL VF 730 (Wafer) & VF 733 (Lugged)

  • Investment Cast stainless steel body
  • EPDM, Nitrile or Viton
  • Disc 316SS
  • 16 Bar, WOG
  • Lever or Gearbox (stainless steel – option)
  • Mounting stem to ISO 5211
  • Shaft Square drive – suitable for direct couple to actuator
  • AS2129 Table E or ANSI 150#
  • Sizes 40mm to 300mm

Technical Brochures

High Performance Butterfly Valve Double Eccentric

UNICOM – Models GTD, FSD & MTD

  • Wafer, Lugged or Double Flanged ANSI 150 / 300 / 600
  • Carbon steel (WCB) or stainless steel body & trim (other materials of construction available)
  • Sizes 50mm – 2100mm

Model GTD

  • Seat Options PTFE, RPTFE
  • Temp Range -40°C to 250°C

Model FSD

  • Seat Options PTFE, RPTFE, Spring Steel
  • Firesafe to API 607 4th Edition
  • Temp Range -40°C to 250°C

Model MTD

  • Seat Options Stellite + ENP Disc Edge
  • Fire-Safe to API 607 4th Edition
  • Temp Range -50C to 650C

Technical Brochures

Butterfly Valve Triple Eccentric – Metal Seated

UNICOM TOD (Triple Offset Valve)

  • Metal to Metal sealing
  • Bi-Directional tight shut-off
  • Triple Offset design with inclined conical sealing system
  • Fire Safety Design
  • Laminated metal or solid metal seat
  • No fasteners on disc, one piece structure
  • Low operating torque
  • Sizes 80mm to 1200mm

Technical Brochures

Bronze – AS1628 – Swing Check Valve

StandardsMark AS1628 – Licence No. 1893

  • Materials are dezincification resistant, as required by AS1628
  • Cast bronze body
  • Working pressure 2100 kPa
  • Sizes 15mm to 80mm

Technical Brochures

Check Valves & Strainers

  • Swing and Piston Check Valves
  • Y-Type Strainers
  • Bronze, cast iron, carbon steel, stainless steel
  • Flanged 150# to 4500# – sizes 50mm to 300mm
  • Screwed – sizes 15mm to 100mm

KSB Check Valves

Application:

  • Power stations, Refineries, general industry, process engineering
  • For water, steam, gas, oil & other media

Design:

  • As per ASME B 16.34; BS 1868 or DIN Standards
  • Available in Forged & Cast Construction
  • Bolted Bonnet Design (Low Pressure Valves)
  • Pressure Seal Bonnet Design (High Pressure Valves)

Technical Brochures

Wafer Check Valve

Austral Fig. 301E

  • Cast iron, cast steel & 316SS body
  • Plates – bronze & 316SS
  • Seat – EPDM or Nitrile
  • Hinge and stop pins 316SS
  • Flanges: AS 2129 Table E or ANSI 150
  • Sizes 40mm to 1200mm

KSB Check Valves

Applications:

  • Power stations, Refineries, general industry, process engineering
  • For water, steam, gas, oil & other media

Design:

  • As per ASME B 16.34; BS 1868 or DIN Standards
  • Available in Forged & Cast Construction
  • Bolted Bonnet Design (Low Pressure Valves)
  • Pressure Seal Bonnet Design (High Pressure Valves)

Technical Brochures

Bronze – AS1628 – Gate Valve

  • StandardsMark AS1628-1999 – Licence No. 1051
  • Meets requirements MP52 – Tested Gates
  • Bronze body
  • Materials are dezincification resistant as required by AS1628
  • Handwheel standard is cast iron – option is T-Bar cast iron
  • Unique “wrap-around” bonnet
  • Sizes 8mm to 100mm

Technical Brochures

HP Valves

Gate, globe, check, screw-down non-return, needle and blow-off valves

  • Designed to ANSI B16.34 and DIN 3840 – Shell Hague Approved
  • Forged carbon, Alloy steels and stainless steel
  • Screwed, socket weld, butt weld or flanged
  • Sizes 10 to 50mm forged
  • Rating ANSI Class 150# to 4500#
  • Manually, Pneumatically and Electrically operated
  • For systems in the petrochemical, refining, offshore, paper mills, thermal power plants

Technical Brochures

Parallel Slide Gate Valves

Key Valve Technologies (KVT)

  • High pressure and high temperature service zero leakage
  • Designed to ASME B16.34 Standard and Special Class
  • Pressure seal and bolted bonnet designs
  • Forged carbon and alloy steels, and stainless steel
  • Sizes 15mm to 600mm
  • Rating ANSI Class 600# to 4500#
  • Manually, Pneumatically and Electrically operated
  • Vee-port trim design available for throttling service

Technical Brochures

Gate & Globe Valves

Stainless steel, bronze, cast steel, cast iron

• Rising and non-rising spindles
• Ends screwed and flanged BSTE/ANSI
• Sizes 15mm to 300mm

KSB Gate Valves

Applications:

  • Power stations, Refineries, general industry, process engineering
  • For water, steam, gas, oil & other media

Design:

  • As per ASME B 16.34; API 600 or DIN Standards
  • Available in Forged & Cast Construction
  • Outside Screw & Yoke, Bolted Bonnet (Low Pressure Valves)
  • Pressure Seal Bonnet Design (High Pressure Valves)
  • Available with Stellite hard-faced Seats & Disc surface
  • Graphite gaskets & packings with Braided wiping rings and other optional packing available
  • Available with Electric Actuator
  • Double disc wedge design

KSB Globe Valves

Applications:

  • Power stations, Refineries, general industry, process engineering
  • For water, steam, gas, oil & other media

Design:

  • As per ASME B 16.34; BS 1873 or DIN Standards
  • Available in Forged & Cast Construction; Bellow Flange design
  • Bolted Bonnet Design (Low Pressure Valves)
  • Pressure Seal Bonnet Design (High Pressure Valves)
  • Available with Stellite hard-faced Seats & Disc surface
  • Graphite gaskets & packings with Braided wiping rings and other optional packing available
  • Available with Electric Actuator

Technical Brochures

Instrument Needle Valves

Needle valves for pressure transmitter/gauge/switch and general isolation.

  • B8 Block and bleed, P6 multiport, A9 angle, G5 High flow and R7 viscous/plugging service
  • 316SS Standard with HS Stem – Self-Centring, non-rotating tip, PTFE packing – NACE MR-01-75
  • High Temperature stems and Graphoil packing
  • RP stem for soft seat and SO for soft tip available
  • Carbon steel, Brass or Monel available

Instrument Manifolds

Contact us for more information on our range of Instrument Manifolds.

Bar Stock Needle Valves

AUSTRAL Series KS6000

  • Carbon steel body Fig 6000CS
  • Stainless steel body Fig 6000SS
  • Pressure rating soft seat – 41,000 kPa (6000 psi)
  • End connections: Female x Female Or Female x male
  • Thread types – BSPT, BSP NPT
  • Adjustable gland
  • Graphite packing
  • Sizes: 8mm to 25mm

Technical Brochures

1541/1543 – Bronze – AS1271 – Aust. Made

TYPE P1479 / P1541 / P1543 / P1551

  • Designed for liquid, gas, vapour and steam service
  • Used on package boilers, sterilisers, air receivers, in pharmaceutical, dying and process plants
  • Meets AS1271 Class A, approved to ASME Code Sections I and VIII
  • Sizes 15mm to 65mm threaded or flanged to Class 300# ANSI
  • Orifice sizes ‘D’ through ‘J’
  • Set pressure range 35 kPag to 2400 kPag

Technical Brochures

1982/1990/3990 – Carbon & Stainless Steel – AS1271 – Aust. Made

TYPE P1982 / P1990 / P3990

  • Designed for liquid, gas and vapour service
  • Meets AS1271 Class A, approved to ASME Code Section VIII
  • Carbon and stainless steel as standard. Alloy steel available
  • Type P1990/3990 – Sizes 15mm to 25mm – threaded, socket weld or flanged to Class 600# ANSI
  • Type P1982 – Size 20mm
  • Orifice sizes ‘D’ to ‘E’
  • Set pressure range 100 kPag to 13,800 kPag

Technical Brochures

19000 – Carbon & Stainless Steel – AS1271

CONSOLIDATED® – Type 1900

  • Designed for liquid, gas and vapour service
  • Meets AS1271 Class A, approved to ASME Code Section VIII
  • Carbon steel, stainless steel, Monel, Hastelloy, Alloy 20 and others
  • Sizes 15mm to 50mm in either threaded, socket weld, butt weld, Grayloc®, sanitary fitting design
  • Set pressure range 100 kPag to 55,172 kPag

Technical Brochures

1982 – Carbon & Stainless Steel – AS1271

CONSOLIDATED® TYPE 1982

  • Designed for liquid, gas and vapour service
  • Meets AS1271 Class A, approved to ASME Code Section VIII
  • Carbon steel and stainless steel
  • Sizes 15mm to 50mm threaded male NPT only
  • Set pressure range 100 kPag to 3448 kPag

Technical Brochures

1900 – Carbon & Stainless Steel – AS1271

TYPE P1900

  • Designed for liquid, gas and vapour service
  • Meets AS1271 Class A, approved to ASME Code Section VIII
  • Carbon steel body with stainless steel trim. Stainless steels and special alloys optional
  • Sizes 25mm to 300mm flanged, Grayloc® or sanitary connections
  • Inlet ratings ANSI Class 150# to 2500#
  • Orifice sizes ‘D’ through ‘W’
  • Set pressure range 100 kPag to 41,380 kPag
  • Type P1900-30 balanced bellows
  • Type P1900-DA O-ring seat seal
  • Type P1900-LA liquid trim

Pilot Operated – Safety Relief Valves – AS1271

  • Suitable for the overpressure protection of many pressurised systems and vessels in the chemical, petrochemical, paper mill, oil and gas production and transmission industries
  • Modulating or pop action pilot
  • Non-flowing modular design
  • Designed for liquid, gas and vapour service
  • Meets AS1271 Class A, approved to ASME Code Section VIII
  • All stainless steel pilot with carbon steel main valve
  • Optional stainless steel main valve or special alloys
  • Sizes 25mm to 250mm flanged, ratings ANSI Class 150# to 1500#
  • Orifice sizes ‘D’ through ‘T’ plus 40 to 250mm full bore
  • Temp. range -40°C to 262°C
  • Set pressure range 100 kPag to 25,862 kPag

Low Pressure Pilot Valves

Shand & Jurs Low Pressure Pilot Valves with

  • Set points between 0.1 to 100kPa
  • Sizes 50mm to 250mm
  • Flanged 100# and 300# ANSI
  • Internal or external pilot sensing
  • Carbon and stainless steel construction
  • Options include dual changeover pilot line filters, check/drain valves

Technical Brochures

1811 – Alloy & Carbon Steel – AS1271

CONSOLIDATED® – TYPE 1811

  • Typical applications are boiler drum, superheater, deaerator, evaporator, heaters, soot blowers, steam generators and process steam
  • Cost effective, high capacity, flanged steel safety valve designed for steam service
  • Meets AS1271 Class A, approved to ASME Code Section I and VIII
  • Carbon steel body to 399°C, alloy steel body to 538°C
  • Sizes 32mm to 150mm flanged, with inlet ratings ANSI Class 300# and 600#
  • Orifice sizes ‘F’ through ‘Q’
  • Set pressure range 100 kPag to 4,828 kPag

Technical Brochures

2700 – Alloy & Carbon Steel – AS1271

CONSOLIDATED® – TYPE 2700 – Medium Pressure

  • Typical applications are boiler drum, superheater, deaerator, evaporator, heaters, soot blowers, steam generators and process steam
  • Meets AS1271 Class A, approved to ASME Code Section I and VIII
  • Carbon steel body to 399°C, or alloy steel to 549°C
  • Sizes 40 to 150mm in either flanged or weld neck design
  • Ratings ANSI Class 600, 900 and 1500
  • Orifice sizes ‘1’ through to ‘Q’
  • Set pressure range 550 kPag to 11,035 kPag

Technical Brochures

1700 – Alloy & Carbon Steel – AS1271

CONSOLIDATED® – TYPE 1700 Maxiflow® – High Pressure

  • Installed on a majority of power generating stations worldwide to protect boilers, superheaters and reheaters from overpressure conditions
  • Premium products designed for steam
  • Meets AS1271 Class A, approved to ASME Code Section I and VIII
  • Carbon steel body to 399°C, alloy steels from 482°C to 604°C
  • Sizes 40 to 150mm in either flanged or weld neck design
  • Ratings ANSI Class 600 to 4500
  • Orifice sizes ‘1’ through to ‘RR’
  • Set pressure range 550 kPag to 36,965 kPag

Technical Brochures

Safety Valves – Forged & Cast Alloy Steel

CONSOLIDATED® – SERIES 3500 Electromatic Ball Valve

  • Provide automatic or manual overpressure protection for steam boiler systems
  • Assist start-up and shutdown venting
  • Certified to ASME Section 1
  • Forged and cast alloy steel bodies with titanium carbide coated ball and seat
  • Sizes 40, 50 and 65mm in either flanged or weld neck design
  • Inlet ratings ANSI Class 1500 to 4700
  • Temperature range -28°C to 593°C

Technical Brochures

Emergency Vent Valves – API2000

Shand & Jurs API2000 /AS1940 Low Pressure Storage Emergency vents – 6{{inches}} to 24{{inches}}

  • Deadweight, Spring Loaded or Magnavent – Magnetic Latching, quick opening
  • Set points 0.5inchH2O to 15psi.
  • Aluminium, carbon and stainless steel. ANSI or API650 flanged.
  • Unique ExpandoSeal pallet restricts vapour loss and allow operating pressure to 95% of set point.

Technical Brochures

Tank Blanketing Valves & Pressure Temperature Regulators

Shand & Jurs – Low Pressure nitrogen blanketing regulators

  • 1/2″ and 1″ screwed or flanged in Aluminium or stainless steel
  • Seat Seals: Buna, Viton, Kalrez
  • Diaphragm: PTFE, Viton, Buna

Technical Brochures

Control Valves

Globe Control Valves

  • Boiler Feed Pump Recirculation or SH/ RH/ PRDS Spray Thermal Power Plants
  • Primary Heat Transfer & Moderator System Control Valves
  • High Pressure Steam Vent & Condenser Dump Application
  • Anti-Surge Control Valves
  • Ammonia Letdown Applications
  • Cryogenic Applications
  • Smart Valves

Technical Brochures

Automatic Recirculation Valves

The HORA Automatic Recirculation Valve PSG-N provides protection to centrifugal pumps from possible damage by thermal and hydraulic overloads at low flow rates. The automatically controlled by-pass, regulates flow to exactly correspond to that, of the pump discharge. Under zero flow conditions, the main flow path is blocked by a non-return disc/valve, influenced by a light positioning spring. The bypass would in this situation, be fully open. As demand for flow increases at the outlet of the PSG-N, the non-return valve begins to open, caused by the increase in pressure differential across the unit. At the same time, the by-pass valve begins to close. Accurate by-pass modulation control is achieved by the use of Low Noise single or multistage pressure let down components, which are designed to give protection against cavitation and flashing. Disassembly and maintenance can be facilitated with removal of the PSG-N from the line.

Technical Brochures

Cage-Ball Control Valve

Contact us for more information.

Pressure Regulating Valves

  • Pressure reducing regulators (UBAN, UBR, UBB series)
  • Pressure relief valves (UBS, UBB, UBAS series)
  • Backpressure regulators (UBS series)
  • Differential pressure (flow) regulators
  • Vacuum-breaking valves
  • MM-BPM series (direct-operated, spring pressure regulators)
  • Maxomatic series (multi-function pilot operated regulators for liquids)
  • Suitable for Air & Process Gases, Liquids and Steam
  • Suitable for markets including Oil & Gas, Blanketing Systems, General Industry and Power

Technical Brochures

Pressure – Oil & Gas & Petro/Chemical

Ashcroft® Solid front Gauges to AS1349 – High Pressure Gas Service 2500kPa and above

  • 100, 115 and 160mm Dial, stainless steel or Phenolic cases, dry and liquid filled
  • Ashcroft® open front Gauges to AS1349
  • 63, 100 and 160mm Dial, stainless steel case, dry and liquid filled
  • Wetted parts 316SS, Monel
  • Accessories – Diaphragm Seals, Snubbers & Pulsation Dempers, Switch and Transmitters, Modules, Max/Min Indicator

Technical Brochures

Pressure – Industrial Heavy Duty

Ashcroft® Open front case Pressure Gauges to AS1349

  • 40, 50, 63, 100, and 160mm Dials, stainless steel, ABS dry and liquid filled and Black Steel case dry
  • Wetted Parts: copper alloy/brass
  • 100, 160mm +/- 1% accuracy, 40 to 63mm +/-3% accuracy

Ashcroft® Digital Pressure gauges

  • Battery, line power, Outputs: switch &/or 4-20mA
  • Accessories – Diaphragm Seals, Snubbers & Pulsation Dampers, switch and transmitters modules, Max./Min. indicators

Technical Brochures

Pressure – Industrial General Purpose

Contact us for more information on this range of pressure gauges.

Pressure – Test Gauges & Test Equipment

Ashcroft® AS1349 Test Gauges +/- 0.25% Vacuum to 100,000kPa
Ashcroft® Portable Deadweight Testers and Comparator pumps, HVC Volume Controller
Heise® Precision 0.1% Accuracy Analog and Digital Test Gauges

  • Solid Front, temperature compensation, mirror dial

Heise® Digital Instrument Calibrator with +/-0.05% Modular Measuring System
Meriam MFT Digital Instrument Calibrator Modular measuring System

  • HART® / Fieldbus compatible. +/-0.05%

Technical Brochures

Pressure – Differential Pressure

Ashcroft® Piston, Piston diaphragm, Diaphragm and Bellows styles cover applications from Offshore Oil and Gas to HVAC and Filter clean

  • 50, 63, 100, 160mm dials, stainless cases
  • Aluminium, 316SS, Monel, Hastelloy
  • Accessories – Diaphragm Seals, Snubbers & Pulsation Dampers, switch and transmitters modules, Max./Min. indicators

Technical Brochures

Magnetic Level Gauges/Indicator

Magnetrol® Orion Atlas™, Gemini™, Aurora™

  • Broad range of alloy and plastic chamber styles
  • True level measurement redundancy with GWR in a single chamber design
  • Cryogenic to high temp range: -196°C to 538°C
  • Full vacuum to ANSI 2500#
  • ASME B31.1 and B31.3 construction as standard
  • NACE MR-01-75 available
  • Totally sealed chambers
  • Visibility up to 30m
  • Long lasting metal flag indication
  • SG range as low as 0.25

Technical Brochures

Manometers

FICO Australian made high quality aluminium housed precision
U-tube manometers, Water and Mercury fill. Perfect for HVAC / Mechanical Services testing – 300 to 900mmH2O / Hg diff. and custom sizes.

  • 3-valve Manifold – equalise/measure
  • Overflow protection – prevent mercury carryover to your system
  • Heavy duty fitted carry case, including stand.

Technical Brochures

FICO Level Gauges

FICO Australian made stainless steel 1:1 pneumatic level transmitters, when combined with Austral pressure gauge scaled for liquid volume or level becomes an accurate, economical level/volume indicator.

  • Large Viton or Buna diaphragm for high sensitivity
  • Tank top, threaded or flanged tank connection
  • Nylon or stainless steel capillary
  • 316SS body

Technical Brochures

  • FICO Pneumatic Level Tx

Level Gauges

Shand & Jurs Automatic Tank Level Gauges – float / tape level gauges for Bulk Liquids Storage Tanks

  • Roof & ground mounted versions – mounting kits for cone & floating roof, horizontal cylindrical & spherical tanks Afriso’s range of mechanical level & volume gauges suitable for fluids from water to diesel oil. Float and in-built hand-pump to pressurise hydrostatic bubbler systems
  • Float gauges: Adjustable range, 0.9 to 4.0 meters
  • Typical applications: Heating / diesel / oils or non-corrosive fluids

Technical Brochures

Temperature – Bimetal Thermometers – Direct Mounted

Ashcroft® Hermetically Sealed, External Zero Adjustment, Lower, Rear, Everyangle Design

  • 75, 125mm Dials, stainless steel case, dry and liquid filled
  • Wetted Parts: 304 ss
  • +/- 1% accuracy

Technical Brochures

Temperature – Thermometers – Remote Mount

Ashcroft® Gas filled High Vibration Resistant

  • 100, 160mm Dials, IP64 / IP65 stainless steel case, Lower, Rear Design
  • Cases dry and liquid filled
  • Wetted Parts: 316SS
  • +/- 1% accuracy

Technical Brochures

Temperature – Thermowells

Austral Machined Barstock Thermowells

  • Taper, Straight Screwed, Flanged to BSTE , DIN or ANSI
  • Materials: 316SS, Monel, Duplex 2205 SAF and more
  • Special designs, Resonance flow calculations, Material Certificates

Technical Brochures

Pressure

Ashcroft Pressure and Differential Pressure Switches

  • IECEx approved and IP65 SPDT / DPDT with Single set points
  • IECEx TSA 08.0005X Ex d IIc T6 IP65 – quick delivery from Stock
  • Dual set points in aluminium or stainless steel housing
  • Set ranges inches H2O and -100kPa to 21,000kPa

Technical Brochures

  • A-Series Switches (SW-14)
  • B Series Switches
  • g_l-series_bul
  • n-series_bul
  • pseries_sw11

Temperature

Ashcroft® Temperature Switches

  • IECEx approved and IP65 SPDT / DPDT with Single set points
  • IECEx TSA 08.0005X Ex d IIc T6 IP65 – quick delivery from Stock
  • Direct and remote capillary mounted
  • Dual set points in aluminium or stainless steel housing
  • Set ranges -40°C to 400°C

Technical Brochures

Vibration Rod Level Switch

Magnetrol® Solitel®

  • Reliable level detection of powders and bulk solids
  • Single rod construction with no moving parts
  • Unique self-cleaning cycle and polished probe avoid problems of build-up
  • Adjustable sensitivity allows easy calibration for various bulk densities
  • Maximum process pressure up to 24.8 barg
  • High temperature version up to 160°C
  • Rigid probe up to 2540mm
  • Flexible probe up to 20 metres
  • ATEX II 1/2D approved

Technical Brochures

Thermal Dispersion Level/Flow Switch

  • Reliable performance as a level or flow switch
  • Excellent low-flow sensitivity
  • No moving parts
  • Adjustable set points and time delay Magnetrol® Thermatel® TD1/TD2/TG1/TG2
  • Full vacuum to ANSI 2500#
  • Temperature up to 450°C
  • SS, Hastelloy C, Monel probe available
  • Self-test electronics ensure proper unit operation
  • Explosion proof and intrinsically safe available
  • IECEx ATEX Exd, Exia approved

Technical Brochures

Ultrasonic Contact Type Level Switch

Magnetrol® Echotel® Model 961, 962, 910, 940, 941

  • Pulsed signal and continuous wave technology
  • Single or dual set points
  • Top or side mounted
  • Process pressure up to 103 bar
  • Process temperature up to 163°C
  • Self-test function for verification of electronics, transducer, and crystal bonding
  • Adjustable time delay
  • Not affected by changes in SG, conductivity, pH, and dielectric or temperature shifts
  • IEC Exd/ATEX Exia available

Technical Brochures

Displacer Type Level Switch

Magnetrol® Series A15, C34, B74, C74, H13, H15, H31, H32, H51 & H52

  • Top mounted and external cage type
  • Pressure rating up to ANSI 2500#
  • Temperature up to 399°C
  • Single or multi switching points
  • Broad range of pneumatic and electric switch mechanisms
  • IECEx Exd approved

Technical Brochures

Float Type Level Switch

Magnetrol® Tuffy®, Series T62, Series T20, Series 3

  • Side-mounted, top-mounted and external cage type
  • Pressure rating up to ANSI 1500#
  • Temperature up to 399°C
  • Single or multi switching points
  • Broad range of pneumatic and electric switch mechanism
  • IEC Exd approved

Technical Brochures

Vane & Disc Actuated Flow Switch

Magnetrol® F10

  • Top-mounted
  • Actuation flow rate is field adjustable
  • Process pressure up to 69 bar
  • Process temperature up to 232°C
  • IEC Exd approved Magnetrolt® F50
  • Low-flow body
  • Requires no calibration
  • Process pressure up to 79 bar
  • Process temperature up to 399°C
  • IEC Exd approved

Technical Brochures

Pressure Transmitters

Ashcroft® Industrial Fixed span Pressure transmitters 4-20mA

  • Accuracy 1%, 0.5% and 0.25%
  • Ranges Vac. To 130,000kPa

Ashcroft® Industrial Fixed range Low Differential Pressure transmitters

  • Accuracy 1%, 0.5% and 0.25%
  • Ranges 0.01″ H2O to 150″ H2O 4-20mA Heise® Precision Fixed span Pressure transmitters ±0.02%

Technical Brochures

Guided-Wave Radar Level Transmitter

Magnetrol® Eclipse® 705/706, Horizon 704

  • Single liquid and liquid/liquid interface level measurement
  • Process pressure from full vacuum to 345 bar
  • Process temperature -150°C to 400°C
  • “Plug & Play” design for easy configuration
  • No level change needed for configuration; no field-calibration required
  • Not affected by changing in SG, dielectric constant, foam
  • 20 probe styles for different applications
  • HART® digital communications (optional)
  • IEC Exia, IEC Exd/Exia available
  • FF & Profibus optional

Technical Brochures

RF Capacitance Type Level Transmitter

Magnetrol® Kotron® 82CE, 805

  • Suitable for all liquids and slurries (dielectric 1.5-100)
  • 24VDC loop power with optional HART® communication
  • Wide range of rigid/flexible probes to suit different applications
  • Process pressure up to 345 bar
  • Process temperature up to 540°C
  • ATEX Exia approved

Technical Brochures

Non-Contact Type Radar Level Transmitter

Magnetrol® Pulsar® R95/R05/R96/R82

  • Pulse Burst patented technology
  • 24VDC loop-power with optional HART® communication
  • Superior performance in the tougher applications of turbulence, foam, and heavy vapors
  • Track extremely rapid rate of level change up to 450cm/minute
  • Antenna designs to 204°C, 51.7 bar
  • Range up to 40m
  • Quick connect/disconnect probe coupling allows vessel to remain sealed
  • IEC & ATEX Exd/Exia approved

Technical Brochures

Ultrasonic Non-Contact Type Level Transmitter

Magnetrol® Echotel® Model 335, 355

  • Broad range level transmitters for level, volume, or open channel flow
  • Measurable range up to 8m
  • Operating pressure up to 3 bar
  • Temperature up to 90°C
  • Narrow beam angle to 7°
  • False target buffering available
  • Temperature compensation for optimum performance

Technical Brochures

Level Gauges / Transmitters

Shand & Jurs and L & J Engineering High Accuracy Automatic Tank Level Gauges for Bulk Liquids Storage Tanks

  • Radar and servo gauging to custody transfer accuracy
  • Float/tape gauge Level transmitter MCG2000SS, SAA approved Exd – 4-20mA or digital outputs up to 6 switches
  • Complete range of switches, up to 6 switches

Technical Brochures

Inventory Tank Gauging Systems

L & J Engineering Bulk Storage Tank Level Gauges – Radar / Servo / Magnetostrictive / Float level gauges for Bulk Liquids Storage Tanks.

  • UNIX or Windows NT based SCADA Inventory Tank gauging systems – level, volume compensated for temperature, density and tank strapping to API standards.
  • Systems are flexible and configurable for small to largest tank depots and refineries.
  • Pump and valve control and digital/analog in/outputs – trending and alarms
  • L&J Engineering interface to most existing tank gauges, or systems, allowing upgrading without complete replacement of existing infrastructure.

Technical Brochures

Thermal Mass Flow Transmitter

Magnetrol® TA2

  • Direct mass flow measurement of air and gases
  • High turndown ratios
  • Excellent low flow sensitivity
  • Low pressure drop
  • Advanced self-diagnostics including probe verification
  • Optional HART® communication and configuration
  • Display provides measured values of mass flow, temperature, totalized flow and diagnostic messages
  • Process pressure up to 200°C
  • Process temperature up to 103 bar
  • IEC Exd approved

Technical Brochures

Diaphragm Seals – Oil & Gas / Chemical & Mining

FICO Australian Made Diaphragm Seals – protect pressure instruments from corrosive, dirty or waxy processes, or from blockage by slurries and non-homogeneous fluids

Technical Brochures

Diaphragm Seals – Sanitary – Food & Beverage /Pharmaceutical

FICO Australian Made Diaphragm Seals – provide a crevice free surface for pressure gauges, transmitters and switches in process systems requiring sanitary conditions

  • Triclover, BSM, Homogeniser, Weld-Spud style Flush diaphragm designs for hydrostatic level
  • 316SS, Monel, Hastelloy & Tantalum diaphragm materials
  • Electronic fusion TIG welded diaphragms; Electropolish finish available
  • Fill Fluids to suit range of temperatures and processes

Technical Brochures

 

Temperature Sensors

NO LONGER AVAILABLE

FICO RTD & Thermocouple Industrial Temperature Sensors

  • GP or Mini IP65 Aluminium head sensors, Spring Loaded probes
  • “Hockey Puck” style transmitters; Output: 4-20mA
  • Standard designs, or custom made to your specifications

Flow Sensors

Meriam Accutube Flow Sensors

  • An annular averaging pitot tube
  • 1% of rate accuracy
  • Suitable for gases, liquids, steam applications
  • Integral and valve manifold Accutube head available
  • Pressure/temperature limit: 103 barg @ 426°C
  • Standard sizes up to 72″

Technical Brochures

Flame Arresters

Shand & Jurs Flame check and flame arresters are used at vent / end-of-line for protection of tanks, vessels and piping systems from flashback damage of Gas Groups NEC D

  • Combination Flame Arrester/Emergency Vent or Flame Arrester/Pressure Vacuum conservation valve
  • FM approved
  • Carbon, 316SS and Hastelloy materials.
  • Screwed 1/4″ to 2″ NPT and 150/300# ANSI flanged 50 to 350mm.

Technical Brochures

Detonation Arresters

Shand & Jurs Detonation arresters are used in-line and end of line to protect vessels and pipelines from detonation and flame fronts in piping systems

  • Suit Gas Group NEC C & D
  • FM and/or USCG approved
  • Carbon, 316SS and Hastelloy materials
  • 150/300# ANSI flanged 50 to 350mm

Technical Brochures

Waste Gas Handling

Anaerobic Digester/Landfill Waste Gas (Methane) Control Equipment Shand & Jurs Condensate & Sediment traps, Manual and Automatic drip traps; Thermal shut off valves; Pressure relief/pressure regulating valves; flame arresters; flame checks; Waste Gas Burners; Low pressure Back Pressure check valves; flame trap assemblies.

Technical Brochures

Bulk Storage Tank Fittings

Shand & Jurs Full range of Gauge & Dip hatches

  • Free vents, Rim vents, dehydrators, water drain valves and floating suction swivels
  • Internal Safety valves (LNG/LPG tanks)

Technical Brochures

Flexible Rubber Joints

Armflex

  • Axial compression and elongation
  • Absorbs vibration, noise and shock
  • Materials – Neoprene, Nitrile, EPDM and others
  • Single and twin sphere connectors
  • End connections – flanged AS2129 Table E, ANSI 150#, DIN or screwed BSP
  • Sizes 40mm to 600mm
  • Also supply Metallic Bellows-type, designed and manufactured to your application requirements

Technical Brochures

ROXIA Dewatering and Industrial Automation

Whole package of Filtration and Automation Solutions

Technical Brochures